Go to Procedure 19, "Installing an IP Phone 2004 for the first time using
DHCP" on
page
97.
Procedure 18
Installing an IP Phone 2004 for the first time
1
Configure a virtual loop on the system using LD 97.
For more information, see Software Input/Output: Administration
(553-3001-311).
2
Configure the IP Phone 2004 on the system using LD 11.
For more information, see Software Input/Output: Administration
(553-3001-311).
3
Connect the IP Phone 2004 components:
a.
Connect one end of the handset cord to the handset jack on the back
of the telephone identified with a handset icon.
b.
Connect the other end of the handset cord to the handset.
4
Choose one of the following connections:
a.
For a telephone not sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN ethernet
Nortel Networks IP Phone 2004
IP Phones
Description, Installation, and Operation
Page 93 of 302