Nortel 2001 Installation And Operation Manual page 285

Appendix B: IP Phone diagnostic utilities
Ethernet Statistics
Figure 63 illustrates the data displayed from the EtherStats submenu item.
Figure 63
Ethernet statistics data display screen
1.Link: UP/Down
2.Duplex:Full/Half
3.Speed: xxx (MB)
4.Auto Sense/Negotiate
Auto-Nego Capability: Y/N
Auto-Nego Completed: Y/N
5.VLANPriority:xxx
6.VLANID:xxxx
7.PktColl:xxxxxxxxxx
8.CRCErrors:xxxxxxxxxx
9.FrameErrors:xxxxxxxxxx
In Figure 63,
• Duplex - duplex mode
• Speed - network speed 10MB/100MB
• Auto Sense/Negotiate = Auto Negotiate Protocol Received or Not (Y -
Yes, N - No)
• VLANPriority = IP Phone VLAN priority
• VLANID = IP Phone VLAN ID
• PCollision = network packet collision peg counts
• CRCErrors = network CRC errors peg counts
• FrameErrors = network Framing errors peg counts
Note: In the IP Phone Configuration menu, Auto Negotiate mode is
the default setting for initial startup. If the telephone is connected to a
network that supports Auto Negotiate, it selects the best speed and
duplex mode available. For more information, see "Full Duplex mode"
on page 41, on page 72, and on page 103.
IP Phones Description, Installation, and Operation
Page 285 of 302