Nortel 2001 Installation And Operation Manual page 34

Page 34 of 302 Nortel Networks IP Phone 2001
553-3001-368 Standard 4.00
9 Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS?
(0-No,1-Yes)
Note: The IP Phone 2001 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
After the S1 and S2 server information is entered, the VLAN option
appears on the display:
Screen prompt
0-No
1-Yes
February 2005
Description
The node IP address of the IP line node
This is a fixed value: 4100
This is a fixed value: 1
The number of times the IP Phone 2001
attempts to connect to the server. Enter 10.
Same as S1 in most cases (see note below)
Same as S1
Same as S1
Same as S1
Enter 0 (for No), since External Application
Servers (XAS) are not supported on the IP
Phone 2001
This prompt exists to support future
implementation of XAS.
Description
Disable 802.1Q and complete the configuration
of the IP Phone 2001.
0-No is the default value.
Enable the 802.1Q header.