Nortel 2001 Installation And Operation Manual page 50

Page 50 of 302 Nortel Networks IP Phone 2002
553-3001-368 Standard 4.00
Table 6
IP Phone 2002 components and functions (Part 3 of 4)
Component
Hold
Headset
Mute
Volume control bar
February 2005
Function
Press the Hold key to put an active call on
hold. Press the line (DN) key beside the
flashing LCD to return to the caller on hold.
Press the Headset key to answer a call using
the headset or to switch a call from the
handset or Handsfree to the headset.
Press the Mute key to listen to the receiving
party without transmitting.
Press the Mute key again to return to a
two-way conversation.
The Mute key applies to Handsfree, Handset,
and Headset microphones.
The Mute LED flashes when the Mute option
is in use.
Use the volume control bar to adjust the
volume of the handset, headset, speaker,
ringer, and, Handsfree feature.
Press the right side of the rocker bar to
increase volume; press the left side to
decrease volume.