Nortel 2001 Installation And Operation Manual page 95

net msk
def gw
9 Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS?
(0-No,1-Yes)
XAS IP:
Note 1: The IP Phone 2004 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
Note 2: If the XAS IP is 00.00.00.00, then pressing the Blue feature key
sends the normal UNIStim message to the TPS. If the XAS IP is any other
value, then pressing the Blue feature key sends the Resume Connection
message to the entered XAS IP.
After the S1 and S2 server information is entered, the VLAN option
appears on the display:
Screen prompt
0-No
1-Yes
Nortel Networks IP Phone 2004
a subnet mask
the default Media Gateway for the IP Phone
2004 on the LAN segment to which it is
connected
Description
the node IP address of the IP line node
this is a fixed value: 4100
this is a fixed value: 1
the number of times the IP Phone 2004
attempts to connect to the server (Enter 10)
same as S1 in most cases (see note below)
same as S1
same as S1
same as S1
Enter 1 (for Yes).
Enter the XAS IP address.
Description
Disable 802.1Q and complete the configuration
of the IP Phone.
0-No is the default value.
Enable the 802.1Q header.
IP Phones Description, Installation, and Operation
Page 95 of 302