Startup Sequence - Nortel 2001 Installation And Operation Manual

Page 102 of 302

Startup sequence

553-3001-368 Standard 4.00
Nortel Networks IP Phone 2004
The IP Phone 2004 registers with the TPS and if needed, will begin the
firmware download. This takes several minutes. When complete, the IP
Phone 2004 resets.
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labelling keys also appear.
15 Check for dial tone and the correct DN above the display.
16 Secure the telephone footstand to the base of the telephone. Use the
angle adjustment grip on the top back of the telephone to adjust the
position.
17 (Optional) Customize the feature keys as required. For more information,
seeIP Phone 2004 User Guide.
When an IP Phone 2004 is connected to the network, it must perform a
startup sequence. The elements of the startup sequence include:
• obtaining the IP parameters
• finding a Media Gateway server
• authenticating the user
See Table 13 on page 103
are obtained.
February 2005
End of Procedure
for a summary of the IP parameters and how they