Nortel 2001 Installation And Operation Manual page 63

9 Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS?
(0-No,1-Yes)
XAS IP:
Note 1: The IP Phone 2002 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
Note 2: If the XAS IP is 00.00.00.00, then pressing the Blue feature key
sends the normal UNIStim message to the TPS. If the XAS IP is any other
value, then pressing the Blue feature key sends the Resume Connection
message to the entered XAS IP.
After the S1 and S2 server information is entered, the VLAN option
appears on the display:
Screen prompt
0-No
1-Yes
Nortel Networks IP Phone 2002
Description
The node IP address of the IP line node.
This is a fixed value: 4100
This is a fixed value: 1
The number of times the IP Phone 2002
attempts to connect to the server. Enter 10.
Same as S1 in most cases (see note below).
Same as S1
Same as S1
Same as S1
enter 1 (for yes).
Enter the XAS IP address
Description
Disable 802.1Q and complete the configuration
of the IP Phone.
0-No is the default value.
Enable the 802.1Q header.
IP Phones Description, Installation, and Operation
Page 63 of 302