Replacing An Ip Phone 2004 - Nortel 2033 Installation And Operation Manual

Replacing an IP Phone 2004

3 Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
4 Enter the password at the password screen, and press OK.
A TN screen displays.
Note: To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager:
System Administration (553-3001-332).
5 Select the Clear soft key to clear the existing TN.
6 Enter the new TN.
Two IP Phones cannot share the same TN. You must remove the
IP Phone 2004 that is currently using the TN.
Procedure 23
Replacing an IP Phone 2004
1 Obtain the node and TN information of the phone you want to replace.
2 Disconnect the IP Phone 2004 that you want to replace.
3 Follow Procedure 17 on
Procedure 19 on
Nortel IP Phone 2004
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
End of Procedure
IMPORTANT!
page 125 and Procedure 18 on
page 137 to install and configure the IP Phone 2004.
IP Phones Description, Installation, and Operation
Page 147 of 600
page 130 or