Page 176 of 302
Table 26
External Lamp Indication tab settings (Part 2 of 2)
Attribute
Message Waiting
The available cadences are:
• On – The external lamp is solid.
• Flash – The external lamp cycles at the following rate: 0.5 seconds on; 0.5 seconds off.
• Flicker – The external lamp cycles at the following rate: 1.625 seconds on; 0.375 seconds
off.
• Blink – The external lamp cycles at the following rate: 0.5 seconds on; 1.5 seconds off.
Note: If more than one External Lamp Indication option is enabled and active, the external
lamp shows the cadence of the option with highest priority. The priority of the External Lamp
Indication options from highest to lowest is: Manual Override, Headset Disconnect, Active Call,
and Message Waiting. For example, if there is a message waiting and an active call, the
cadence for Active Call is used for the external lamp.
553-3001-368
Standard 4.00
Nortel Networks IP Softphone 2050
Description
Select one of the cadences to indicate when the IP Softphone 2050
message waiting light is on. Select None to disable this feature.
Note 1: The IP Softphone 2050 message waiting light normally
indicates that there is a message waiting. However, most systems also
turn on or flash the message waiting light when the IP Softphone 2050
is ringing.
Note 2: The available cadences are listed at the end of this table.
February 2005