Nortel 2001 Installation And Operation Manual page 272

Page 272 of 302
553-3001-368 Standard 4.00
Appendix B: IP Phone diagnostic utilities
Procedure 51
Entering an IP address
1 Scroll through the TraceRoute submenu to the IP Addr menu item. An IP
address appears if previously entered. Example 47.249.48.20.
2 Press the Select soft key.
3 Use the Navigation keys to scroll to the destination IP address.
— If the destination IP address is in the list, press the Select soft
key to select the IP address. Press the Select soft key again to
return to the TraceRoute submenu.
— If the destination IP address is not in the list, continue scrolling
through the available IP address list until the IP address 0.0.0.0
appears. Press the Select soft key.
Tip: To edit the IP address, use the Delete soft key and the Cancel
soft key. Use the * key for dots.
4 Press the Select soft key to save the new IP address, or press the Cancel
soft key to return to the TraceRoute submenu.
Procedure 52
Changing the number of Hops
1 From the TraceRoute submenu, use the Navigation keys to scroll to the
Max Nr of Hops submenu item.
2 Press the Select soft key.
Tip: Use the keypad and the Delete and Clear soft keys to enter the
number of Hops.
3 Do one of the following:
• Press the Select soft key to accept the change and return to the
TraceRoute submenu.
• Press the Cancel soft key to return to the TraceRoute submenu.
Procedure 53
Tracing a route
1 From the TraceRoute submenu, use the Navigation keys to scroll to the
TraceRoute! submenu item.
2 Press the Select soft key. Route tracing starts.
Tip: Press the Stop soft key to stop the trace.
February 2005