Disassembly; Steps For Disassembly - PAC Alcor JFTOT II Manual

4. DISASSEMBLY

4.1 STEPS FOR DISASSEMBLY

1. Disconnect the fuel reservoir outlet line fitting
from the heater tube housing.
2. Disconnect the reservoir outlet line from the
prefilter.
3. Disconnect and remove the heater section outlet
line.
4. Disconnect the heater section (bypass) line
fitting.
JFTOT II D3241 Manual Rev. C
5. Raise the heater tube thermocouple to the top of
the sliding scale assembly.
ENTER ENTER
EXIT
TOGGLE
STEP
PRINT PRINT
SCREEN SCREEN REFRESH
F1 F1 F2 F2
F3 F3 F4 F4 F5 F6 F7 F8 F9 F10
6. Remove the right hand Allen cap screws from
each bus bar.
7. Loosen the left hand Allen screws three or four
turns each, but do not remove.
ENTER ENTER
EXIT
TOGGLE
STEP
PRINT PRINT
REFRESH
SCREEN SCREEN
F1 F1 F2 F2 F3 F3 F4 F4 F5 F5 F6 F6
F7 F8 F9 F10
Page 19