PAC Alcor JFTOT II Manual page 65

12. Using a squeeze bulb, blow out the quick connect
fitting on the water reservoir to remove any
solvent.
13. Flush the water reservoir cover with solvent.
14. Flush the two water reservoir cover lines with
solvent and thoroughly blow dry using a squeeze
bulb.
JFTOT II D3241 Manual Rev. C
15. Flush the reservoir outlet line with solvent and
thoroughly blow dry using a squeeze bulb.
16. Flush the heater section outlet line with solvent
and thoroughly blow dry using a squeeze bulb.
Check the o-rings on all lines. Replace any o-ring
(P/N 53706) if damaged or worn.
17. Flush the pre-filter components with solvent.
18. Flush the glass jar with solvent.
Page 5