PAC Alcor JFTOT II Manual page 3

A T
BOUT HIS
This User's Manual is suitable for JFTOT 230
and 240 models for S/N 477 and beyond, until
superseded. This manual may be used for S/N
200-476, but there have been some changes in
component part numbers. Two User's Manuals
are provided with each JFTOT. One manual is
written in English, the other is written in one of
the following four languages as specified by the
customer; French, German, Spanish and Italian.
The Service Manual is available in English only and
is provided in back of the English User's Manual.
SYMBOLS, SAFETY CONSIDERATIONS
AND WARNINGS
This equipment has been designed and tested in
accordance with EN 61010, "Safety Requirements
for Electrical Equipment for Measurement, Con-
trol, and Laboratory Use." It is intended for indoor
use only. This instruction manual contains informa-
tion, warnings, and cautions that must be followed
to insure safe operation and to maintain the
equipment in safe operating condition. Use of this
product in a manner not specified may impair the
protection provided by the equipment.
Safety glasses should be worn by the operator and
anyone in the vicinity of the equipment for protec-
tion from splashed materials. Non-flammable heat
resistant gloves as well as non-flammable clothing
should be worn when using this equipment. Tests
performed with this equipment may involve
hazardous materials. This instruction manual does
not purport to address all safety concerns associ-
ated with these tests. It is the responsibility of the
user of this equipment to establish appropriate
safety and health practices and to determine
applicability limitations prior to use.
For safe operation, this equipment must be electri-
cally grounded by way of the protective grounding
connection in the power cord. Do not, under any
circumstances, defeat the protective grounding
connection.
JFTOT II User's Manual Rev. C
M
ANUAL
Two very powerful features of the JFTOT-II are
the REFRESH and PRINT SCREEN buttons on
the keypad. Whenever you are looking at a
menu and see something that looks inappropri-
ate, press the REFRESH key so the computer
will re-write the display. If the menu still
appears incorrect, press the PRINT SCREEN
key so the computer will print the complete
display to the printer. This print out can be
faxed to customer service to help troubleshoot
and resolve problems.
Servicing and repair should be performed only
by qualified personnel. Disconnect the equip-
ment from the power source when servicing or
replacing electrical components.
Service replacement parts and technical assis-
tance for this equipment may be obtained from:
PAC
300 Bammel Westfield Road
Houston, TX 77090
Tel: 281-580-0339 or 800-365-2143
Fax: 281-580-0719
This symbol (exclamation point in a
triangle) indicates a general Caution or
Warning. A Caution alerts you to information
that is important for protecting the equipment
and performance. A Warning alerts you to
information that is important for protecting
yourself, others and equipment from damage.
This symbol (a lightning bolt in a
triangle) indicates an electrical shock
hazard. Inside the MCRT are exposed live
voltage circuits. The MCRT should be opened
only by qualified service personnel. To prevent
electrical shock hazard DO NOT operate the
MCRT in rain or wet conditions.
Page iii