most spares and supplies are provided
with the JFTOT to run 20 tests.
However, other items are not provided
with the JFTOT but are required for
normal operation; these are specified
below.
A5.2
The following items are spares and
supplies provided with the JFTOT.
Enough items are provided to run 20
tests.
• Heater Tube and Filter Kit
•
Prefilter Paper
• Filter Paper
• Insulator Bushings
• Lip Seal, Fuel Reservoir
• O-Ring, Fuel Reservoir
• O-Ring, Water Reservoir
• O-Ring, Line Connector
• O-Ring, Drive Column
• Aeration Tube
• Fuse, 6.25 amp
• Fuse, 6 amp
• Fuse, 2 amp
• Fuse, .750 amp
• Residue Trap Jar
• Cleaning Pad, Stainless Steel
• Brush, 1-5/8" x 3"
• Brush, 1/4" x 2"
• Wash Bottle
• Disposable Gloves
• Paper Tissue
• Aluminum Foil
• Tweezers
• Rubber Squeeze Bulb
Page 42
• Silicone Grease
• Gearbelt
• Beaker, 1000 ml plastic
A5.3
The following items are required to be
replaced after each test and therefore
must be stocked in accordance with
the volume of testing involved:
• Heater tube and filter kit
• Prefilter kit (contains elements for
25 tests)
• General-purpose, retentive, qualita-
tive filter paper.
A5.4
The following supplies are spare parts
needing periodic replacement as
required and should therefore be
stocked in accordance with the volume
of testing involved.
• Insulators (4/set)
• Lip Seal, Fuel Reservoir
• O-Ring, Fuel Reservoir
• O-Ring, Water Reservoir
• O-Ring, Line Connectors
• O-Ring, Drive Column
• Thermocouple
• Temperature calibration standard
(tin, 99% pure)
• Temperature calibration standard
(lead)
• Glass jar (Residue trap jar)
• Fuse, T 6.25A
• Fuse, F 6A
• Fuse, F 6A
• Fuse, F .750A
• Aeration tube
• Silica Gel (Note: do not stock this
item, order only when needed.)
JFTOT II Operation Manual Rev. C