Unpacking An Ex3300 Switch; Installing And Connecting An Ex3300 Switch - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Related
Documentation

Unpacking an EX3300 Switch

Related
Documentation
82
Perform initial configuration of the switch by following instructions in
5.
and Configuring an EX Series Switch (CLI Procedure)" on page
Set the switch's management options by following the appropriate instructions:
6.
Connecting a Switch to a Network for Out-of-Band Management on page 109
Connecting a Switch to a Management Console on page 111
Rack Requirements for EX3300 Switches on page 63
Cabinet Requirements for EX3300 Switches on page 64
Clearance Requirements for Airflow and Hardware Maintenance for EX3300 Switches
on page 66
The EX3300 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
CAUTION: EX3300 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
but where you have enough room to remove the system components.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Remove the accessory box and verify the contents in it against the parts inventory on
4.
the label attached to the carton.
Pull out the packing material holding the switch in place.
5.
Verify the chassis components received against the packing list included with the
6.
switch. An inventory of parts provided with the switch is provided in
(Packing List) for an EX3300 Switch" on page
Save the shipping carton and packing materials in case you need to move or ship the
7.
switch later.
Mounting an EX3300 Switch on page 84
Installing and Connecting an EX3300 Switch on page 81
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 119
"Connecting
119.
"Parts Inventory
83.
Copyright © 2015, Juniper Networks, Inc.