Sfp+ Direct Attach Cables For Ex Series Switches - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Table 20: Optical interface Support for SFP+ Gigabit Ethernet Transceivers in EX3300
Switches (continued)
Ethernet Standard Specification
10GBASE-ER Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Modal bandwidth
Distance
DOM support
Software required
Support for Virtual Chassis
configuration
Related
Documentation

SFP+ Direct Attach Cables for EX Series Switches

46
Value
EX-SFP-10GE-ER
10 Gbps
LC
Dual
1550 nm
–4.7 dBm
4 dBm
–11.3 dBm
–1 dBm
SMF
9/125 µm
–
40 km (24.8 miles)
Available
Junos OS for EX Series switches, Release 12.1 or later
Yes
Front Panel of an EX3300 Switch on page 6
Installing a Transceiver in an EX Series Switch on page 95
Removing a Transceiver from a Switch on page 129
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 7 m (23 ft), making them ideal
Copyright © 2015, Juniper Networks, Inc.