Rj-45 To Db-9 Serial Port Adapter Pinout Information For A Switch; Table 17: Rj-45 To Db-9 Serial Port Adapter Pinout Information - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Table 16: EX Series Switches Console Port Connector Pinout Information (continued)
Pin Signal
8 CTS Input
Related
Documentation

RJ-45 to DB-9 Serial Port Adapter Pinout Information for a Switch

28
Description
Clear to send
EX2200 Switches Hardware Overview
Rear Panel of an EX3200 Switch
Rear Panel of an EX3300 Switch on page 7
Rear Panel of an EX4200 Switch
EX4300 Switches Hardware Overview
Front Panel of an EX4500 Switch
EX4550 Switches Hardware Overview
Management Panel of an EX4600 Switch
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
Routing Engine (RE) Module in an EX8216 Switch
Connecting a Switch to a Management Console on page 111
Configuring the Console Port Type (CLI Procedure)
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect
to a management device such as a PC or a laptop. If your laptop or PC does not have a
DB-9 male connector pin and you want to connect your laptop or PC to the switch, use
a combination of the RJ-45 to DB-9 female adapter supplied with the switch along with
a USB to DB-9 male adapter.
Table 17 on page 28 provides the pinout information for the RJ-45 to DB-9 serial port
adapter.

Table 17: RJ-45 to DB-9 Serial Port Adapter Pinout Information

RJ-45 Pin Signal
1 RTS
2 DTR
3 TXD
4 GND
6 RXD
DB-9 Pin Signal
8 CTS
6 DSR
2 RXD
5 GND
3 TXD
Copyright © 2015, Juniper Networks, Inc.