Juniper EX3300 Complete Hardware Manual page 84

Complete Hardware Guide for EX3300 Ethernet Switches
Related
Documentation
68
Leave at least 24 in. (61 cm) in front of the switch and behind the switch. For service
personnel to remove and install hardware components, you must leave adequate
space at the front and back of the switch. NEBS GR-63 recommends that you allow
at least 30 in. (76.2 cm) in front of the rack or cabinet and 24 in. (61 cm) behind the
rack or cabinet.
Rack Requirements for EX3300 Switches on page 63
Cabinet Requirements for EX3300 Switches on page 64
General Site Guidelines on page 56
Rack-Mounting and Cabinet-Mounting Warnings on page 164
Cooling System and Airflow in an EX3300 Switch on page 22
Copyright © 2015, Juniper Networks, Inc.