Figure 30: Measurements For Installing Mounting Screws; Figure 31: Mounting The Switch On A Wall - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Related
Documentation
94

Figure 30: Measurements for Installing Mounting Screws

Rear
8.32 in. (21.1 cm)
2.76 in (7 cm)
A
5.98 in.
(15.2 cm)
C
Front
Lift the unit (one switch or two) by grasping each side, and hang the unit by attaching
5.
the brackets to the mounting screws as shown in
Tighten all mounting screws.
6.

Figure 31: Mounting the Switch on a Wall

Hang attached brackets
on wall-mounted screws.
Connecting AC Power to an EX3300 Switch on page 105
Connecting DC Power to an EX3300 Switch on page 107
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 119
Wall-Mounting Warning for EX3300 Switches on page 169
Wall-mount baffle
18.68 in. (47.4 cm)
4.49 in.
(11.4 cm)
E F
Side wall-mount brackets
Figure 31 on page
Rear
panel
Front
panel
B
D
94.
Copyright © 2015, Juniper Networks, Inc.