Switches; Figure 13: Clearance Requirements For Airflow And Hardware Maintenance For Ex3300 Switches - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Related
Documentation
Clearance Requirements for Airflow and Hardware Maintenance for EX3300 Switches
66
Use the wall-mount kit from Juniper Networks to mount the switch on a wall. The
wall-mount kit is not part of the standard package and must be ordered separately.
Clearance Requirements for Airflow and Hardware Maintenance for EX3300 Switches
on page 66
Wall-Mounting Warning for EX3300 Switches on page 169
Mounting an EX3300 Switch on a Desk or Other Level Surface on page 91
Mounting an EX3300 Switch on a Wall on page 92
When planning the site for installing an EX3300 switch, you must allow sufficient
clearance around the installed switch (see
Figure 13: Clearance Requirements for Airflow and Hardware Maintenance
for EX3300 Switches
24" (61 cm)
Clearance required
for maintenance
Front
17.5"
44.5 cm
6" (15.2 cm)
For airflow
The power cord retainer extends out of the rear of the chassis by 3 in. (7.62cm).
Follow these clearance requirements:
For the cooling system to function properly, the airflow around the chassis must be
unrestricted. See Figure 14 on page 67
Figure 13 on page
Clearance required
for maintenance
12"
19"
(30.5 cm)
(48.2 cm)
6" (15.2 cm)
Mounting bracket
For airflow
and Figure 15 on page
66).
24" (61 cm)
Rear
67.
Copyright © 2015, Juniper Networks, Inc.