Radiation And Laser Warnings; Laser And Led Safety Guidelines And Warnings For Switches; General Laser Safety Guidelines - Juniper EX3300 Complete Hardware Manual

CHAPTER 17

Radiation and Laser Warnings

Laser and LED Safety Guidelines and Warnings for Switches

General Laser Safety Guidelines

Copyright © 2015, Juniper Networks, Inc.
Laser and LED Safety Guidelines and Warnings for Switches on page 155
Radiation from Open Port Apertures Warning on page 158
EX Series switches, OCX1100 switches, and the XRE200 External Routing Engine are
equipped with laser transmitters, which are considered a Class 1 Laser Product by the
U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN
60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 155
Class 1 Laser Product Warning on page 156
Class 1 LED Product Warning on page 156
Laser Beam Warning on page 157
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
155