Juniper EX3300 Complete Hardware Manual page 30

Complete Hardware Guide for EX3300 Ethernet Switches
Table 6: LCD Panel Menu Options (continued)
Menu Description
STATUS The Status menu has the following options:
Show VCP status—Choose one of the following:
Press the
NOTE:
configuration.
Press the
Show PSU status—Choose one of the following:
Press the
Press the
Show Environment status—Choose one of the following:
Press the
Fan status: OK, Failed, Absent
Temp status: OK, High, Shutdown
Press the
Show Junos version—Choose one of the following:
Press the
Press the
EXIT STAT MENU?—Choose one of the following:
Press the
menu.
On an EX3300 switch that is a member of a Virtual Chassis configuration, press the
to the Show VCP status option.
NOTE:
configuration.
If you do not want users to use Status menu options, disable the entire menu or individual menu options. See
Configuring the LCD Panel on EX Series Switches (CLI Procedure).
14
button to display the Virtual Chassis port (VCP) status: Up, Down, Disabled.
Enter
This option is available only for an EX3300 switch that is a member of a Virtual Chassis
button to go to the next option in the Status menu.
Menu
button to display the status of the power supply: OK, Failed, Absent.
Enter
button to go to the next option in the Status menu.
Menu
Enter button to display the status of the fan and temperature:
button to go to the next option in the Status menu.
Menu
button to display the version of Junos OS for EX Series switches loaded on the switch.
Enter
button to go to the next option in the Status menu.
Menu
Enter button to exit the Status menu. Then press the
This option is available only for an EX3300 switch that is a member of a Virtual Chassis
Menu button to go to the Maintenance
button to return
Menu
Copyright © 2015, Juniper Networks, Inc.