Lcd Panel Modes - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches

LCD Panel Modes

12
This topic describes:
LCD Panel Modes on page 12
LCD Panel Menus on page 13
The LCD panel operates in four modes: boot, idle, status, and maintenance.
The LCD panel operates in boot mode during switch reboot. The boot mode displays the
key milestones in the switch boot process. The boot mode does not have any menu
options. After the boot process is complete, the LCD panel automatically reverts to the
Idle menu.
In an EX3300 switch that is not a member of a Virtual Chassis, the first line of the LCD
panel displays:
The slot number—For a standalone EX3300 switch, the slot number is always
The role of the switch—For a standalone EX3300 switch, the role is always
master).
Hostname
In an EX3300 switch that is a member of a Virtual Chassis, the first line of the LCD panel
displays:
The slot number (the member ID for the Virtual Chassis member)
Role of the switch in a Virtual Chassis (
member)
Hostname
In the idle mode, the second line displays the mode of the network ports' Status LED and
the number of chassis alarms. The number of alarms is updated every second.
In the status mode, the second line displays:
Virtual Chassis port (VCP) status (for an EX3300 switch that is a member of a Virtual
Chassis)
Status of the power supply
Status of the fan and temperature
Version of Junos OS for EX Series switches loaded on the switch
In the maintenance mode, the second line displays one of the following options that you
can use to configure and troubleshoot the switch:
System halt
System reboot
Load rescue
RE for master, BK for backup, and
Copyright © 2015, Juniper Networks, Inc.
.
00
(for
RE
LC for linecard