User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
no telnet
This command disables telnet sessions. If sessions are disabled, no new telnet sessions are
established.
Format
Mode
HTTP Commands
ip http secure-port
This command is used to set the sslt port where port can be 1-65535 and the default is port 443.
Default
Format
Mode
no ip http secure-port
This command is used to reset the sslt port to the default value.
Format
Mode
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default
Format
Mode
no ip http secure-protocol
This command is used to remove protocol levels (versions) for secure HTTP.
Format
8-34
no telnet
Privileged EXEC
443
ip http secure-port <portid>
Privileged EXEC
no ip http secure-port
Privileged EXEC
SSL3 and TLS1
ip http secure-protocol [SSL3] [TLS1]
Privileged EXEC
no ip http secure-protocol [SSL3] [TLS1]
December 2004, 202-10010-02
Switching Commands