Show Eventlog; Show Hardware; Show Interface - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
IP Address
slot/port

show eventlog

This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
Format
Mode
File
Line
Task Id
Code
Time
Note: Event log information is retained across a switch reset.

show hardware

This command displays inventory information for the switch.
Format
Mode
Description
Burned in MAC Address Universally assigned network address.
Software Version

show interface

This command displays a summary of statistics for a specific port or a count of all CPU traffic
based upon the argument.
Format
8-2
numbers that are separated by colons, for example
01:23:45:67:89:AB
The IP address assigned to each interface.
Valid slot number and a valid port number.
show eventlog
Privileged EXEC
The file in which the event originated.
The line number of the event
The task ID of the event.
The event code.
The time this event occurred.
show hardware
Privileged EXEC
Text used to identify the product name of this switch.
The release.version.revision number of the code currently run-
ning on the switch.
show interface {<slot/port> | switchport}
December 2004, 202-10010-02
Switching Commands