No Serial Baudrate; Serial Timeout; No Serial Timeout; Set Prompt - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

no serial baudrate

This command sets the communication rate of the terminal interface to 9600.
Format
Mode

serial timeout

This command specifies the maximum connect time (in minutes) without console activity. A value
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default
Format
Mode

no serial timeout

This command sets the maximum connect time (in minutes) without console activity to 5.
Format
Mode

set prompt

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Format
Mode
Privileged EXEC

show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter
is required. In an SVL system, the [fdbid | all] parameter is not used and will be ignored if entered.
8-22
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200}
Line Config
no serial baudrate
Line Config
5
serial timeout <0 - 160>
Line Config
no serial timeout
Line Config
set prompt <prompt string>
December 2004, 202-10010-02
Switching Commands