NETGEAR ProSafe GSM7212 User Manual page 192

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
Switching config vlan port tagging <enable |
disable> <1-4094> <slot/port | all>
Switching config vlan port pvid <1-4094>
<slot/port | all>
Switching config vlan port acceptframe <all |
vlan> <slot/port | all>
Switching config vlan port ingressfilter
<enable | disbale> <slot/port | all>
Switching config protocol create
<groupname>
A-16
CLI Command
Mode
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Global
Config
December 2004, 202-10010-02
Syntax
vlan tagging <1-4094>
no vlan tagging <1-4094>
vlan port tagging all <1-4094>
no vlan port tagging all <1-4094>
vlan pvid <1-4094>
vlan port pvid all <1-4094>
vlan acceptframe {vlanonly | all}
no vlan acceptframe
vlan port acceptframe all {vlanonly |
all}
no vlan port acceptframe all
vlan ingressfilter
no vlan ingressfilter
vlan port ingressfilter all
no vlan port ingressfilter all
vlan protocol group <groupname>
IS CLI Mapping