Show Mac-Address-Table Multicast; Show Mac-Address-Table Static - NETGEAR ProSafe GSM7212 User Manual

Layer 2 managed switch software
Hide thumbs Also See for ProSafe GSM7212:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Interfaces

show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If the command
is entered with no parameter, the entire table is displayed. This is the same as entering the optional
all parameter. The user can display the table entry for one MAC Address by specifying the MAC
address as an optional parameter.
Format
Mode
Mac Address
Type
Component
Description
Interfaces
Forwarding Interfaces The resultant forwarding list is derived from combining all the

show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is
selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan
must also be entered and the Static MAC Filter information will be displayed only for that MAC
address and VLAN.
Switching Commands
The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
show mac-address-table multicast [<macaddr> | all]
Privileged EXEC
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
displayed as 8 bytes. In an SVL system, the MAC address will be
displayed as 6 bytes.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The component that is responsible for this entry in the Multicast
Forwarding Database. Possible values are IGMP Snooping,
GMRP, and Static Filtering.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
component's forwarding interfaces and removing the interfaces
that are listed as the static filtering interfaces.
December 2004, 202-10010-02
8-57

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents