Dot1X User; No Dot1X User; Radius Accounting Mode; No Radius Accounting Mode - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

dot1x user

This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
Format
Mode

no dot1x user

This command removes the user from the list of users with access to the specified port or all ports.
Format
Mode

radius accounting mode

This command is used to enable the RADIUS accounting function.
Default
Format
Mode

no radius accounting mode

This command is used to set the RADIUS accounting function to the default value - i.e. the
RADIUS accounting function is disabled.
Format
Mode

radius server host

This command is used to configure the RADIUS authentication and accounting server.
8-100
dot1x user <user> {<slot/port> | all}
Global Config
no dot1x user <user> {<slot/port> | all}
Global Config
Disabled
radius accounting mode
Global Config
no radius accounting mode
Global Config
December 2004, 202-10010-02
Switching Commands