Show Spanning-Tree Mst Summary; Show Spanning-Tree Summary; Show Spanning-Tree Vlan - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the
switch. On execution, the following details are displayed.
Format
Mode
MST Instance ID List
For each MSTID:
Associated FIDs
Associated VLANs

show spanning-tree summary

This command displays spanning tree settings and parameters for the switch. The following details
are displayed on execution of the command.
Format
Mode
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
Configuration Name
Configuration Revision Level Configured value.
Configuration Digest Key Calculated value.
Configuration Format Selector Configured value.
MST Instances

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Switching Commands
show spanning-tree mst summary
Privileged EXEC and User EXEC
List of multiple spanning trees IDs currently configured.
List of forwarding database identifiers associated with this
instance.
List of VLAN IDs associated with this instance.
show spanning-tree summary
Privileged EXEC and User EXEC
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
TConfigured name.
List of all multiple spanning tree instances configured on the
switch
December 2004, 202-10010-02
8-81