Show Ip Dhcp Binding; Show Ip Dhcp Global Configuration; Show Ip Dhcp Pool Configuration - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

show ip dhcp binding

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
Mode
IP address
Hardware Address
Lease expiration
Type

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
Mode
Service DHCP
Number of Ping Packets
Excluded Address

show ip dhcp pool configuration

This command displays pool configuration. If '*' is specified, configuration for all the pools is
displayed.
Format
Mode
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers
DHCP Server Commands
show ip dhcp binding [address]
Privileged EXEC and User EXEC
The IP address of the client.
The MAC Address or the client identifier.
The lease expiration time of the IP Address assigned to the client.
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
Privileged EXEC and User EXEC
The field to display the status of dhcp protocol.
The maximum number of Ping Packets that will be sent to verify
that an ip address id not already assigned.
The ranges of IP addresses that a DHCP server should not assign
to DHCP clients.
show ip dhcp pool configuration {<name> | *}
Privileged EXEC and User EXEC
The name of the configured pool.
The pool type.
The lease expiration time of the IP Address assigned to the client.
The list of DNS servers available to the DHCP client
The list of the default routers available to the DHCP client
December 2004, 202-10010-02
9-7