User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode
show ip ssh
This command displays the ssh settings.
Format
Mode
Administrative Mode
Protocol Level
Connections This field specifies the current ssh connections.
Device Configuration Commands
addport
This command adds one port to the port-channel (LAG). The first interface is a logical slot and
port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port. See 'speed'
command.
Format
Mode
auto-negotiate
This command enables automatic negotiation on a port. The default value is enable.
Format
Mode
Switching Commands
ip ssh protocol [1] [2]
Privileged EXEC
show ip ssh
Privileged EXEC
This field indicates whether the administrative mode of SSH is
enabled or disabled.
The protocol level may have the values of version 1, version 2 or
both versions 1 and version 2.
addport <logical slot/port>
Interface Config
auto-negotiate
Interface Config
December 2004, 202-10010-02
8-37