Spanning-Tree; No Spanning-Tree; Spanning-Tree Configuration Name; No Spanning-Tree Configuration Name - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode
VLAN Identifier
Associated Instance

spanning-tree

This command sets the spanning-tree operational mode to enabled.
Default
Format
Mode

no spanning-tree

This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-
tree configuration is retained and can be changed, but is not activated.
Format
Mode

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of at most 32 characters.
Default
Format
Mode

no spanning-tree configuration name

This command resets the Configuration Identifier Name to its default.
Format
Mode
8-82
show spanning-tree vlan <vlanid>
Privileged EXEC and User EXEC
Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree
Disabled
spanning-tree
Global Config
no spanning-tree
Global Config
The base MAC address displayed using hexadecimal notation as
specified in IEEE 802 standard.
spanning-tree configuration name <name>
Global Config
no spanning-tree configuration name
Global Config
December 2004, 202-10010-02
Switching Commands