Show Monitor; Show Port - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Most MFDB Entries Ever Used This displays the largest number of entries that have been
Current Entries

show monitor

This command displays the Port monitoring information for the system.
Format
Mode
Port Monitor Mode
Probe Port slot/port
Monitored Port slot/port is the slot/port that is configured as the monitored port. If this

show port

This command displays port information.
Format
Mode
slot/port
Type
Admin Mode
Switching Commands
present in the Multicast Forwarding Database table. This value is
also known as the MFDB high-water mark.
This displays the current number of entries in the Multicast For-
warding Database table.
show monitor
Privileged EXEC
indicates whether the Port Monitoring feature is enabled or dis-
abled. The possible values are enable and disable.
is the slot/port that is configured as the probe port. If this value
has not been configured, 'Not Configured' will be displayed.
value has not been configured, 'Not Configured' will be dis-
played.
show port {<slot/port> | all}
Privileged EXEC
The physical slot and physical port.
If not blank, this field indicates that this port is a special type of
port. The possible values are:
Mon - this port is a monitoring port. Look at the Port Monitoring
screens to find out more information.
Lag - this port is a member of a port-channel (LAG).
Probe - this port is a probe port.
Selects the Port control administration state. The port must be
enabled in order for it to be allowed into the network. - May be
enabled or disabled. The factory default is enabled.
December 2004, 202-10010-02
8-59