User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to
the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
Format
Mode
MST Instance ID
Port Identifier
Port Priority
Port Forwarding State
Port Role
Port Path Cost
Designated Root
Designated Port Cost
Designated Bridge
Designated Port Identifier
LAN
If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the
settings and parameters for a specific switch port within the common and internal spanning tree.
The <slot/port> is the desired switch port. In this case, the following are displayed.
Port Identifier
Port Priority
Port Forwarding State
Port Role
Port Path Cost
Designated Root
Designated Port Cost
Designated Bridge
Switching Commands
show spanning-tree mst port detailed <mstid> <slot/port>
Privileged EXEC and User EXEC
Current spanning tree state of this port
Configured value of the Internal Port Path Cost parameter
The Identifier of the designated root for this port.
Path Cost offered to the LAN by the Designated Port
B
ridge Identifier of the bridge with the Designated Port.
Port on the Designated Bridge that offers the lowest cost to
the
The port identifier for this port within the CST.
The priority of the port within the CST.
The forwarding state of the port within the CST.
The role of the specified interface within the CST.
The configured path cost for the specified interface.
Identifier of the designated root for this port within the CST.
Path Cost offered to the LAN by the Designated Port.
The bridge containing the designated port
December 2004, 202-10010-02
8-79