Users Name; No Users Name; Users Passwd - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
SNMPv3 Authentication This field displays the authentication protocol to be used for the
SNMPv3 Encryption

users name

This command adds a new user (account) if space permits. The account <username> can be up to
eight characters in length. The name may be comprised of alphanumeric characters as well as the
dash ('-') and underscore ('_'). The <username> is not case-sensitive.
Six user names can be defined.
Format
Mode

no users name

This command removes an operator.
Format
Mode
Note: The admin user account cannot be deleted.

users passwd

This command changes the password of an existing operator. User password should not be more
than eight characters in length. If a user is authorized for authentication or encryption is enabled,
password must be eight alphanumeric characters in length. The username and password are not
case-sensitive. When a password is changed, a prompt will ask for the operator's former password.
If none, press enter.
Default
Format
Mode
Switching Commands
specified login user.
This field displays the encryption protocol to be used for the
specified login user.
users name <username
Global Config
no users name <username>
Global Config
No Password
users passwd <username>
Global Config
December 2004, 202-10010-02
>
8-91