Show Mac-Address-Table Gmrp; Show Mac-Address-Table Igmpsnooping - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

show mac-address-table gmrp

This command displays the GARP Multicast Registration Protocol (GMRP) entries in the
Multicast Forwarding Database (MFDB) table.
Format
Mode
Mac Address
Type
Description
Interfaces

show mac-address-table igmpsnooping

This command displays the IGMP Snooping entries in the Multicast Forwarding Database
(MFDB) table.
Format
Mode
Mac Address
Type
Description
8-56
show mac-address-table gmrp
Privileged EXEC
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
displayed as 8 bytes. In an SVL system, the MAC address will be
displayed as 6 bytes.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
show mac-address-table igmpsnooping
Privileged EXEC
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
displayed as 8 bytes. In an SVL system, the MAC address will be
displayed as 6 bytes.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The text description of this multicast table entry.
December 2004, 202-10010-02
Switching Commands