Show Network - NETGEAR ProSafe GSM7212 User Manual

Layer 2 managed switch software
Hide thumbs Also See for ProSafe GSM7212:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default
Format
Mode
Forwarding DB ID
Agetime

show network

This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of
the switch's front panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front panel ports through which traffic is switched
or routed.
Format
Mode
IP Address
Subnet Mask
Default Gateway
Burned In MAC Address The burned in MAC address used for in-band connectivity.
Locally Administered MAC Address If desired, a locally administered MAC address
Switching Commands
all
show forwardingdb agetime [fdbid | all]
Privileged EXEC
Fdbid (Forwarding database ID) indicates the forwarding data-
base whose aging timeout is to be shown. The all option is used to
display the aging timeouts associated with all forwarding data-
bases. This field displays the forwarding database ID in an IVL
system. This field will not be displayed in an SVL system.
Displays the address aging timeout for the associated forwarding
database in IVL. In an SVL system, this will display the system's
address aging timeout value in seconds.
show network
Privileged EXEC and User EXEC
The IP address of the interface. The factory default value is
0.0.0.0
The IP subnet mask for this interface. The factory default value is
0.0.0.0
The default gateway for this IP interface. The factory default
value is 0.0.0.0
can be configured for in-band connectivity. To take effect, 'MAC
Address Type' must be set to 'Locally Administered'. Enter the
address as twelve hexadecimal digits (6 bytes) with a colon
between each byte. Bit 1 of byte 0 must be set to a 1 and bit 0 to a
0, i.e. byte 0 should have the following mask 'xxxx xx10'. The
MAC address used by this bridge when it must be referred to in a
unique fashion. It is recommended that this be the numerically
December 2004, 202-10010-02
8-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents