Telnet - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

Telnet

To display the Telnet page, click Security
Telnet Authentication List
This page allows you to select the login and enable authentication list available. The login list
specifies the authentication method(s) you want used to validate switch or port access for the
users associated with the list. The enable list specifies the authentication method(s) you want
used to validate privileged EXEC access for the users associated with the list. These list can
be created by Authentication List page under Management Security.
1. Use Login Authentication List to specify which authentication list to use when you login
through telnet. The default value is networkList.
2. Use Enable Authentication List to specify which authentication list you are using when
going into the privileged EXEC mode. The default value is enableList.
462 | Chapter 6. Managing Device Security

Access > Telnet.