No Radius Server Retransmit; Radius Server Timeout; No Radius Server Timeout; Show Accounting - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

no radius server retransmit

This command sets the maximum number of times a request packet is re-transmitted, when no
response is received from the RADIUS server, to the default value, i.e. 10.
Format
Mode

radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to
30.
Default
Format
Mode

no radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received, to the default value, i.e. 6.
Format
Mode

show accounting

This command is used to display the configured RADIUS accounting mode, accounting server and
the statistics for the configured accounting server.
Format
Mode
If the optional token 'statistics <ipaddr>' is not included, then only the accounting mode and the
RADIUS accounting server details are displayed.
Switching Commands
radius server retransmit <retries>
Global Config
no radius server retransmit
Global Config
6
radius server timeout <seconds>
Global Config
no radius server timeout
Global Config
show accounting [statistics <ipaddr>]
Privileged EXEC
December 2004, 202-10010-02
8-103