User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
set gmrp interfacemode all
This command enables GARP Multicast Registration Protocol on all interfaces. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality will be disabled on that interface. GARP functionality will
subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed
from an interface that has GARP enabled.
Default
Format
Mode
no set gmrp interfacemode all
This command disables GARP Multicast Registration Protocol on a selected interface.
Format
Mode
set gvrp adminmode
This command enables GVRP.
Default
Format
Mode
no set gvrp adminmode
This command disables GVRP.
Format
Mode
set gvrp interfacemode
This command enables GVRP (GARP VLAN Registration Protocol) for a specific port.
Default
Format
8-48
Disabled
set gmrp interfacemode all
Global Config
no set gmrp interfacemode all
Global Config
Disabled
set gvrp adminmode
Privileged EXEC
no set gvrp adminmode
Privileged EXEC
Disabled
set gvrp interfacemode
December 2004, 202-10010-02
Switching Commands