Setting Method [G]; Setting Method [B]; Setting Method [A] - Mitsubishi Electric MELSERVO-J5 User Manual

Setting method [G]

The servo parameters related to the in-position setting are as follows.
Servo parameter Symbol
PA10 INP
PC06.0 *COP3
PD13.2 *DOP2

Setting method [B]

The servo parameters related to the in-position setting are as follows.
Servo parameter Symbol
PA10 INP
PD13.2 *DOP2

Setting method [A]

The servo parameters related to the in-position setting are as follows.
Servo parameter Symbol
PA10 INP
PC24.0 *COP3
PD31.2 *DOP2
Name Outline
In-position range Set the in-position range.
Initial value: 25600 [pulse]
In-position range unit Select a unit of the in-position range.
selection 0: Command input pulse unit (initial value)
1: Servo motor encoder pulse unit
INP output signal ON Select the in-position on condition.
condition selection 0: Within the in-position range (initial value)
1: Within the in-position range and at the completion of command output
2: Within the in-position range, at the completion of command output, and at
start signal off
Name Outline
In-position range Set the in-position range.
Initial value: 25600 [pulse]
INP output signal ON Select the in-position on condition.
condition selection 0: Within the in-position range (initial value)
1: Within the in-position range and at the completion of command output
Name Outline
In-position range Set the in-position range.
Initial value: 400 [pulse]
In-position range unit Select a unit of the in-position range.
selection 0: Command input pulse unit (initial value)
1: Servo motor encoder pulse unit
INP output signal ON Select the in-position on condition.
condition selection 0: Within the in-position range (initial value)
1: Within the in-position range and at the completion of command output
3 BASIC FUNCTION
3.13 In-position range setting
3
145