Mitsubishi Electric MELSERVO-J5 User Manual page 301

■Setting "Static friction when extended"
After attaching the belt to the equipment, drive the servo motor, and estimate the static friction with the friction vibration
estimation function. For friction vibration estimation function, refer to the following.
Page 241 Friction vibration estimation function
In accordance with the completed static friction estimation, set [Pr. PF75 Static friction when extended] as follows.
• When estimation of static friction has completed only for the forward rotation side
[Pr. PF75 Static friction when extended] = Static friction on the forward rotation side
• When estimation of static friction has completed only for the reverse rotation side
[Pr. PF75 Static friction when extended] = Static friction on the reverse rotation side
• When estimation of static friction has completed for both the forward and reverse rotation sides
[Pr. PF75 Static friction when extended] = (Static friction at forward + at reverse rotation)/2
Servo Symbol Name
parameter
PF75 ASF Static friction when extended
■Setting "Belt tension on installation"
Set the design value of belt tension in [Pr. PF72 Belt tension on installation]. Measure the belt tension using a tension gauge.
It is recommended to use the friction vibration estimation function to measure the value of belt tension immediately after the
friction estimation completes. For friction vibration estimation function, refer to the following.
Page 241 Friction vibration estimation function
Servo Symbol Name
parameter
PF72 SBT Belt tension on installation
■Setting "Static friction during installation"
After attaching the belt to the equipment, drive the servo motor, and estimate the static friction with the friction vibration
estimation function. It is recommended to perform both forward rotation and reverse rotation in order to estimate the static
friction at both rotation directions. In accordance with the estimated static friction, set [Pr. PF74 Static friction during
installation] as follows.
• When estimation of static friction has completed only for the forward rotation side
[Pr. PF74 Static friction during installation] = Static friction on the forward rotation side
• When estimation of static friction has completed only for the reverse rotation side
[Pr. PF74 Static friction during installation] = Static friction on the reverse rotation side
• When estimation of static friction has completed for both the forward and reverse rotation sides
[Pr. PF74 Static friction during installation] = (Static friction at forward + at reverse rotation)/2
Servo Symbol Name
parameter
PF74 SSF Static friction during installation
Description
Set a static friction for when the belt stretches or for when the belt
is looser than at the time of the attachment. Set the static friction
with any of the following values estimated by the friction
estimation function depending on the value of [Pr. PF71.1 Belt
tension deterioration prediction friction selection]: static friction at
forward rotation, static friction at reverse rotation, or the average
of the estimated frictions.
The belt tension deterioration function is disabled when the
setting is: [Pr. PF74 Static friction during installation] < [Pr. PF75
Static friction when extended].
Initial value: 0 [0.1 %]
Description
Set a belt tension for when the belt is attached to the equipment.
The servo parameter indicates the reference belt tension
threshold used in the belt diagnosis function.
Initial value: 0 [0.1 N]
Description
Set a static friction for when the belt is attached to the equipment.
Set the static friction with any of the following values estimated
by the friction estimation function depending on the value of [Pr.
PF71.1 Belt tension deterioration prediction friction selection]:
static friction at forward rotation, static friction at reverse rotation,
or the average of the estimated frictions.
Initial value: 0 [0.1 %]
4 APPLICABLE FUNCTIONS
4.5 Machine diagnosis
4
299