ERROR MESSAGES
If an error code appears on the display:
Check for improper wiring. Make sure there are no cut or broken wires.
Verify that sense jumper blocks or jumper wires are properly installed.
OVER CAPACITY
Check for proper excitation voltages.
Make sure the indicator is properly configured. Check number of grads,
channel selection, display divisions, formats, etc.
Make sure W ZERO and W SPAN values are correct.
GROSS WEIGHT < 0
Make sure volts calibration values are correct.
Check the software revision. In older versions with multiple scale
applications, the display blanks when any scale goes over or under
range.
Call Rice Lake Weighing Systems for assistance.
A/D CONVERTER
OUT OF RANGE
Appendix
9-19