Table of Contents
Advertisement
9-12
IQ plus 800/810 Installation Manual
Setpoint push print ticket
When a setpoint push print is set (PSHRPNT in the first level menu
SETPNTS), the gross and tare values from the source channel of the
setpoint achieved will be saved and used on the setpoint ticket. The
ticket is scheduled to be printed immediately, but the ticket is actually
printed a fraction of time later than the setpoint is satisfied. All data
items (other than the source channel's gross and tare weights) will
retain their current values at the time of print (not frozen values at the
time the setpoint was achieved). The printing of time and date is not
supported for the setpoint ticket. Table 9-4 is a list of commands you
can use to configure setpoint tickets.
Table 9-4.
Commands for push print tickets
Command
SV1
SV2
BN
TV
PV
NA
NLx
SPx
SU
*
In the case of relative setpoints, relative value is printed.
** If the number (x) is missing assume 1.
*** After receiving this command, the IQ plus 800/810 will send all succeeding
weight data unformatted. "Unformatted" means no leading spaces, no
decimal place, and no trailing characters. The next SU command will toggle
back to normal weight data format with leading spaces and the decimal point.
Description
Weight value when setpoint was achieved
Label for SV1 weight value
Current setpoint number
Current setpoint target value*
Current setpoint preact value
Print setpoint name in SPFMT format
x number of terminating sequences (<CR> or
<CR/LF>)**
x number of spaces**
Toggle weight data normal format and no
format***
Advertisement
Table of Contents
