Table of Contents
Advertisement
DISP
TARE
TIME/
DATE
DISP
ACCUM
DISP
ROC
NEW
I.D.
SCALE
#
®
1-6
IQ plus
800/810 Installation Manual
Table 1-4. (continued)
Disp Tare
In the normal weighing mode, DISP TARE displays the current weight
in the tare register (if any) and lights the "T" annunciator.
In the Truck In/Out mode, key in a truck ID number and press
DISP TARE. If the ID is not found, "NO ID" appears on the display. If
the ID is found, press ENTER to display the stored weight value. If you
press CLEAR, the display prompts "CLR ID?." If you press CLEAR a
second time, the indicator clears the stored truck ID.
Also, in the Truck In/Out mode, you can press DISP TARE repeatedly
to scroll through the stored IDs.
Time/Date
Press once to display the date. Press it a second time to display the time.
You can enter new values for the date and time while they appear in the
display. Simply type in a new value and press ENTER. Use the 24-hour
format to enter time values.
Disp Accum
Displays the current weight from the accumulator register and sequen-
tially lights the accumulator annunciators. Press repeatedly to access all
five accumulators, or enter number (0 – 4) and press DISP ACCUM.
If you press CLEAR, the display prompts "CLR AC?." If you press
CLEAR a second time, the indicator clears the accumulate register.
Disp ROC
Displays the rate of change for weight data on the current load cell
channel. This is expressed as the change in weight during a specific
period of time, such as lbs/min, gals/hour, etc. The "ROC" annunciator
lights when this mode is active.
This key only works if the optional rate of change feature is installed.
New ID
In the Truck In/Out mode, NEW ID lets you enter a new truck ID
number. Key in a number with the numeric keys and press NEW ID to
save. When a truck is on the scale, you can use NEW ID to enter the
new ID number, save the tare, and print a weigh-in ticket, all in one step.
Also, you can use NEW ID to enter an ID number not associated with
the truck program or weight storage (see Section 5, Operating Modes,
for more information).
Scale # (or BASE # for HE)
Selects an analog input channel or total of all channels to display.
The annunciator light indicates which input source or sources are
selected. If sources are totaled, more than one annunciator light is
illuminated.
Note: This key only works if more than one input channel is enabled and
selected.
Advertisement
Table of Contents
