Appendix; Error Messages - Rice Lake IQ 700IS Installation Manual

6.0

Appendix

6.1

Error Messages

The IQ 700IS indicator provides a number of error and status messages. When an error occurs, the message is
shown on the indicator LCD display. Table 6-1 lists these messages and their meanings.
Error Message
Err1 Loss of configuration
Err1a Loss of option configuration
Err1b
Err1c
Err2 Loss of zero calibration
Err3 Loss of span calibration
Err5 Loss of auto tare
Err6 Loss of auto zero
Err9 Not in span calibration
Err 10H
Input > 3.3 mV/V at full scale
Err 10L Input < 0.4 mV/V at full scale
Err 10P PTZ (push to zero) > 2%
Err 10– PTZ > weight used for span calibration
OL Gross overload
UL Gross underrange
CAL Calibration successful
30 IQ 700IS Installation Manual
Description
Reconfigure
Recalibrate
Acquire tare
Acquire zero
Program span value before entering
Recalibrate span to set full scale in the range 0.4–3.3 mV/V
Perform zero calibration
Check load cell wiring
—
Table 6-1. IQ 700IS Error Messages
Solution