Download Print this page
Rice Lake IQ plus 590-DC Operator Card

Rice Lake IQ plus 590-DC Operator Card

Digital weight indicator

Advertisement

Quick Links

IQ plus
590-DC Digital Weight Indicator
®
Operator Card
This Operator Card describes the IQ plus 590-DC LCD display, weighing and counting operations, and
procedures for battery replacement and AC adapter use.
LCD Display and Annunciators
The IQ plus 590-DC display uses a set of LCD
annunciators to provide additional information about
the value being displayed. The illustration below
shows these annunciators and their meanings.
G
The displayed weight is a gross weight.
N
The displayed weight is a net weight.
Scale is at standstill or within the specified motion
band. Some operations, including zero, tare, and
printing functions, can only be done when the
standstill symbol is shown.
Center of zero. Gross weight is within 0.25
graduations of zero. This annunciator lights when
the scale is zeroed.
Indicates that a tare has been entered. The tare
value can be entered by pressing the
the keypad or by sending the KTARE EDP
command.
Gross mode
Net mode
May 2002
TARE
key on
Standstill
Tare in system
Center of zero
Do not open the indicator enclosure!
Warning
Refer all repairs and modifications to
your distributor or service technician.
Indicates that the battery charge is low.
lb, kg, PC
Three arrow annunciators on the right side of the
LCD display indicate the units associated with the
displayed value. The bottom arrow annunciator
(PC) is lit when the indicator is in piece count
mode. The top and middle arrows, labeled lb and
kg, show primary and secondary units, as
described below:
If the displayed weight is in pounds, the top
arrow (lb) is lit; if kilograms, the middle
arrow (kg) is lit.
If the primary unit of weight is pounds, the
middle (kg) arrow is lit for secondary units—
or, if the primary unit is kilograms, the top
(lb) arrow is lit for secondary units, unless the
secondary unit of weight is the same as the
primary unit.
If neither primary nor secondary units are
pounds or kilograms, the top arrow is used as
a primary units annunciator and the middle
a r r ow i s u s e d a s t h e s e c o n d a r y u n i t s
annunciator.
A set of replacement overlay decals is included in
the parts kit for units other than pounds and
kilograms.
lb
kg
PC
Low battery
Primary
Displayed units
Secondary
Piece count mode

Advertisement

loading

Summary of Contents for Rice Lake IQ plus 590-DC

  • Page 1 Warning Refer all repairs and modifications to your distributor or service technician. This Operator Card describes the IQ plus 590-DC LCD display, weighing and counting operations, and procedures for battery replacement and AC adapter use. LCD Display and Annunciators The IQ plus 590-DC display uses a set of LCD annunciators to provide additional information about the value being displayed.
  • Page 2 Weighing Operations The illustration below shows the IQ plus 590-DC keypad and normal mode key functions. NORMAL MODE KEY FUNCTIONS ZERO GROSS TARE UNITS PRINT Units MODE ENTER SAMPLE PRINT DISPLAY TARE POWER I / O Basic IQ plus 590-DC weighing operations are 2.
  • Page 3 Counting Operations The illustration below shows the IQ plus 590-DC keypad and piece count mode key functions. COUNTING MODE KEY FUNCTIONS ZERO GROSS TARE UNITS PRINT Units MODE ENTER SAMPLE PRINT DISPLAY TARE POWER I / O NOTE: Legal-for-trade applications require product to be sold by weight rather than an equivalent parts count.
  • Page 4 3. Reinstall the top screw in the backplate. 4. Plug AC adapter from power outlet to the indicator adapter port. The IQ plus 590-DC enclosure cannot Caution be rated for NEMA 4X/IP66 applications with the AC adapter port cover open.