Truck Weigh-In And Weight-Out Tickets - Rice Lake IQ plus 800 Installation & Operation Manual

Truck weigh-in and weight-out tickets

You can use the TRWIN and TRWOUT format strings to customize the
truck weigh-in and weight-out tickets. The strings are handled the same
way the GFMT/NFMT strings are handled, except the list of commands
includes different data. Table 9-3 is a list of the commands you can use
to configure truck print tickets.
Table 9-3.
Commands for truck tickets
Command
TR1
TR2
TR3
TI
DA
TD
S
ID
CN
NLx
SPx
* Weight data includes key words stored or keyed when applicable.
** If the number (x) is missing, 1 is assumed.
All the commands listed for GFMT/NFMT will also be accepted on the
truck tickets even though other pieces of data are not appropriate. The
user is responsible for setting up a legal for trade format. See the
example below for default format and related ticket formats.
The default format is:
TRWIN=<NL>ID <ID> SCALE
<S><NL2>GROSS<TR1><NL2><DA><TI><NL>
TRWOUT=<NL6>ID <ID> SCALE
<S><NL2>GROSS<TR1><NL>TARE <TR2><NL>NET
<TR3><NL2><DA><TI><NL>
These strings produce the following tickets:
ID 1 SCALE TOTAL
GROSS 5254 LB STORED
12/01/93 01:46 PM
( 6 blank lines)
ID 1 SCALE TOTAL
GROSS 5578 LB
TARE 5254 LB RECALLED
NET 324 LB
12/01/93 01:46 PM
Description
Gross weight for current ticket*
Tare weight for current ticket*
Net weight for current ticket
Time only
Date only
Time and date
Scale number
ID number
Consecutive number
x number of terminating sequences (<CR> or
<CR/LF>)**
x number of spaces**
Appendix 9-11