Setpoint Menu Chart - Rice Lake IQ plus 800 Installation & Operation Manual

SETPNTS
SETPT 1
OFF
Setpoint menu structure
®
7-2 IQ plus 800/810 Installation Manual

Setpoint menu chart

SETPT 2–20 same as SETPT 1
Continuous or Batch setpoints
GROSSSP NET SP
PAUSE DELAY
COZ INMOTON INRANGE
Figure 7-1.
Table 7-2.
Figure 7-1 is a graphic overview of the setpoint menu structure. See
Section 3, Configuration, for more information.
+REL SP –REL SP
Batch setpoints
WAIT SS COUNTER
Continuous setpoints
–GROSS
Beyond the main setpoint categories, there are additional parameters
(Table 7-2) which apply (dependent upon the requirements of a particu-
lar setpoint). See Table 3-4 for expanded definitions of the following
setpoint parameters.
Additional setpoint parameters
Name... Action...
DIGOUT defines which digital output to activate
VALUE defines numerical setpoint value
PSHTARE presses TARE key when setpoint trips
PSHPRNT presses PRINT key when setpoint trips
TRIP defines condition necessary for setpoint to trip
BANDVAL defines the BAND value for inband and outband trips
HYSTER defines a dead zone for continuous setpoint reaction
ALARM displays "ALARM" briefly when setpoint trips
PSHACCM accumulates weight values when setpoint trips
PREACT enables preact feature (see Front Panel PREACT Value
Access on page 7-5)
PREVAL adjusts the trip values of the configured setpoint
BATCH defines the setpoint as a batch step when set to ON
SOURCE defines which input channel to use
ACCESS allows viewing, changing, or hiding setpoints from front
panel access
NAME defines a name for a specific setpoint number, 0 – 9 (see
Assigning the Names to Setpoints on page 7-6)
Global parameter
BATCHNG
%REL SP AUTO
MANUAL
AUTOJOG
–NET BATCHPR
OFF
TIMER CONCUR